Fuel System and Repair
Fuel Pump Vacuum And Pressure Tester
Test for fuel line pressure and vacuum leaks and check for leaky valves, timing, fuel pump vacuum and pressure and gas line leakage. Tester is equipped with an easy-to-read gauge with a 3' hose and a vacuum hose adapter fitting.
Universal Noid Light With Windshield Mount
Adjustable probes fit all electronic fuel injection systems.
8 Pc. Noid Light Test Kit With Extension Harness
Noid Lites are a proven test device to quickly determine if the electrical signal is present at the fuel injector. Just plug in and turn over the engine; flashing noid indicates good signal.
11 Pc. Noid Light And Iac Test Kit With Harness Extension
Simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles. Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine. A flashing light indicates normal pulsing voltage.
Fuel Injection Pulse Tester
Performs a cylinder balance test when injectors are suspect in engine performance problems.
Basic Fuel Injection Presure Testing Kit
For quickly and accurately diagnosing fuel pressure problems on GM, Chrysler, Jeep and Ford vehicles with multiport fuel injection systems. Simply fasten adapter to the Schrader valve on the fuel rail.
Fuel Injection Tester Adapter Update Kit
Use with any Star F.I. pressure test kit with a quick coupler Includes right angle adapters for Ford and GM. Good for those hard to reach places. Includes adapter to allow checking Deadhead Pressure on 1/4', 5/16', and 3/8' hose.
Fuel Injection Pressure Tester
This tester determines if the fuel pressure regulator needs adjusting or replacing. It will allow the mechanic to adjust it to the correct pressure if its is adjustable. It will also tell if other components are bad, such as fuel pump, filter, etc.
Master Fuel Injection Pressure Test Set
This set is a must have for the professional technician! The uniquely designed 3-1/2' gauge has a special expanded 1lb. increment dual dial for accurate reading, with a 100 PSI/700 kPA scale. It also has a relief valve and 6 ft. of tubing to relieve the pressre and fuel safely.